User's Manual

7
BCM 4.0 Installation Checklist and Quick Start Guide
Chapter 1
Getting started
About this guide
The BCM 4.0 Installation Checklist and Quick Start Guide describes how to install and configure
BCM200 and BCM400 systems running Business Communications Manager (BCM) 4.0 software.
Although not specifically covered in this document, BCM 4.0 software functions with the
BCM1000 system. For more information, refer to the BCM 3.7 for BCM1000 Installation and
Maintenance Guide and the BCM 4.0 for BCM1000 Installation and Maintenance Guide
Addendum.
Purpose
The procedures described in this guide relate to the hardware of the BCM system. This guide
provides task-based information on how to install the hardware components and perform basic
configuration tasks. For more detailed configuration information, consult the appropriate technical
documentation.
Audience
This guide is directed to experienced installers responsible for installing and configuring BCM 4.0
systems.
If this is your first BCM installation or if you require more detailed information, refer to the
BCM200/400 4.0 Installation and Maintenance Guide.
Precautions
Nortel recommends that you read this document in its entirety before starting the described
procedures.
Observe the general safety precautions against personal injury and equipment damage outlined in
the Regional Installation Safety Manual (ISM) at all times.
Prior to starting the procedures presented in this document, arrange all materials, tools, and test
equipment at the work location to minimize fatigue and inconvenience.
IMPORTANT!
Print this chapter to record the progress of the BCM system installation
and configuration. The tables and checklists are valuable tools to guide
you through the installation process.