User's Manual

Chapter 4 Connection and configuration procedures 43
BCM 4.0 Installation Checklist and Quick Start Guide
Figure 12 Telephony Resources page
4 In the Modules section, select the row of the MBM that you want to configure.
5 Double-click the Prog Type field to display the drop-down list.
6 Select the type of MBM that you installed in that location.
7 Click Enable.
8 Repeat steps 4 to 7 to enable each MBM in your system.
You can set other parameters for the MBMs depending on the type of MBM you installed.
Customizing other parameters
You can also customize the following parameters:
• Security policies (see the BCM 4.0 Administration Guide)
• Modem settings (see the BCM 4.0 Networking Configuration Guide)
• Software updates (see the BCM 4.0 Administration Guide)
• Voice mail (see the CallPilot Manager Set Up and Operation Guide for information on using
the web-based interface to configure your voice mail system, or see the CallPilot Telephone
Administration Guide for information on using Telset Administration to configure your voice
mail system)
• Backup and restore (see the BCM 4.0 Administration Guide)