User's Manual

Chapter 4 Connection and configuration procedures 39
BCM 4.0 Installation Checklist and Quick Start Guide
You can configure the BCM system by using either Element Manager or the Startup Profile.
To configure the BCM system using BCM Element Manager
1 Open BCM Element Manager.
2 From the Network menu, select New Network Element and then select Business
Communications Manager.
3 Enter the BCM system IP address, the username, and password (the defaults are shown
below):
IP address: 10.10.10.1
Username: nnadmin
DHCP server:
• Enable/disable server
• IP domain name
• Primary DNS
• Secondary DNS
• Default gateway
Configuration > Data
Services > DHCP Server >
Subnets tab
DHCP Server N/A
IP Phones:
• Enable registration
• Enable global pwd
• Global pwd
• Auto-assign DNs
• Advertisement logo
Configuration > Resources
> Telephony Resources
IP Telephones N/A
SNMP Agent:
• Enable/disable SNMP
agent
• Minimum security
• SNMP version support
Configuration >
Administrator Access >
SNMP > General tab
SNMP Agent N/A
SNMP community:
• Community string
• Type of access
Configuration >
Administrator Access >
SNMP > Community
strings tab
SNMP Community N/A
SNMP manager:
• Manager IP address
Configuration >
Administrator Access >
SNMP > General tab
SNMP Manager N/A
User account:
•User ID
•Group
• Description
• Callback number
Configuration >
Administrator Access >
Accounts and Privileges >
View by Accounts tab
User Account N/A
Table 9 BCM system parameters (Sheet 2 of 2)
Parameters Element Manager Startup Profile Telset Administration
15 minutes