User's Manual

36 Chapter 4 Connection and configuration procedures
N0060602N0060602
9 Enter the number of the parameter you want to configure.
Downloading from the BCM web page
After your computer is connected to the BCM system, either through an Ethernet crossover cable
or through a LAN connection, you can download Element Manager and the Startup Profile
template from the Administrator Applications area of the BCM web page.
To access the BCM web page
1 Open a web browser and enter the BCM system IP address.
The Enter Network Password dialog box opens.
2 Enter the username and password (defaults are shown below):
Username: nnadmin
Password: PlsChgMe!
3 Click OK.
The Welcome to BCM web page opens.
To download and install BCM Element Manager
1 Access the BCM web page (see “To access the BCM web page” on page 36).
2 On the Welcome to BCM web page, click Administrator Applications.
The Administrator Applications page opens.
3 On the Administrator Applications page, click BCM Element Manager.
The BCM Element Manager panel opens.
4 Read the information on this panel.
5 Click Download Element Manager on the right side of the screen, and follow the instructions
to download.
6 After BCM Element Manager has finished downloading, double-click the application and
follow the instructions to install.
Note: If the Initialization Menu screen appears instead of the Main Menu shown above,
your BCM system is not initialized correctly.
Warning: Changing this information on an existing system completely erases the
telephony programming and disables the telephony system. It also reboots the BCM
system.
2 minutes
15 minutes