User's Manual
Chapter 4 Connection and configuration procedures 35
BCM 4.0 Installation Checklist and Quick Start Guide
To connect through the serial port
1 Attach the null modem cable to the serial port on the BCM main unit.
2 Attach the other end of the null modem cable to the serial port on the terminal or computer.
3 Ensure that the BCM main unit and your terminal or computer are turned on.
4 Access the BCM main unit using one of the following methods:
a If using a terminal emulation program (Hyperterminal), attach a configuration computer to
the BCM main unit serial port (recommended method).
b If you are accessing the BCM main unit through your local area network through SSH
(secure socket shell), use the default IP address 10.10.10.1.
5 When prompted for a User ID, type:
nnadmin
6 When prompted for a Domain, press <ENTER>.
7 When prompted for a Password, type:
PlsChgMe!
8 The Configuration main menu screen appears. Refer to Figure 11.
Figure 11 Configuration main menu screen
Note: The location of the transmit (TX) and receive (RX) pins on your terminal can vary.
Refer to your terminal or computer documentation to confirm pin locations.
10 minutes