User's Manual

Chapter 1 Getting started 11
BCM 4.0 Installation Checklist and Quick Start Guide
Checklists
Before installing the BCM hardware, complete the following checklists (see the BCM200/400 4.0
Installation and Maintenance Guide for more information).
General checklist
F Determine the location for the main unit (and optional expansion unit), telephones, and other
equipment based on spacing and electrical requirements.
F Order the required trunks from the central office.
F Ensure that you have all the equipment and supplies you need to install the system.
F Ensure that the system complies with the environmental requirements.
F Ensure that the system complies with the electrical requirements.
F Ensure that the system complies with the physical requirements.
Main unit components checklist
Check that you have the following components, and inspect the components for any damage:
F one main unit
F one power supply cable
F four rubber feet
F one set of rack-mount brackets
F documentation CD
F BCM 4.0 Installation Checklist and Quick Start Guide
V.90 modem settings
(North America only)
SNMP agent (security, version)
SNMP manager IP address
SNMP community string
Table 5 System information (Sheet 2 of 2)
Description Value Comments
5 minutes