User manual

470 Remote Gateway 9150 Installation and Administration Guide
Display log definitions Standard 3.1
Statistic Definition
LOG NUMBER 82
DESCRIPTION This log indicates that Network Manager task states for a particular
remote unit was reset and all the connections to the remote were
cleared. This can happen due to the following reasons:
1) An error occurred in the system to automatically trigger Network
Manager reset.
2) The user has issued a debug command "nmr x" where x is a
valid remote unit number.
SEVERITY MAJOR
TASK Network Manager
PRODUCT RLC, 9150, 911x
CANCELLATION None
ACTION TO BE TAKEN System usually works as normal after the log is displayed. If not,
contact technical support personal for help. If the log is displayed
too frequently, check if anyone is entering debug commands. If not,
contact technical support.
PARAMETERS 1) Remote unit
DISPLAYED TEXT States reset in NM for Remote: P1