User manual

418 Remote Gateway 9150 Installation and Administration Guide
Display log definitions Standard 3.1
Statistic Definition
LOG NUMBER 11
DESCRIPTION This log indicates that database reading from Flash at Power on
failed. This can be caused by corrupted Flash. As a result, the
system starts with the default configuration.
SEVERITY CRITICAL
TASK MMI
PRODUCT RLC, 9150, 911x
CANCELLATION None
ACTION TO BE TAKEN 1) Re-configure the system and then save it to Flash.
Note: When you save configuration changes to Flash, the
system suspends new call processing for approximately 30
seconds.
2) Restart the system and log into the system and check the
configured parameters. If the problem persists contact your
vendor.
PARAMETERS 1) Reason reading from Flash failed
DISPLAYED TEXT Database reading from Flash failed - P1
PRODUCES HOST PBX
ALARM AND ALERT
Yes