User manual

Remote Gateway 9150 Installation and Administration Guide 209
January 2005 Configuring the Remote Gateway 9150 unit
Notes:
! Generally, choosing matching Remote Gateway 9150 and RLC port
numbers simplifies configuration and administration.
! If the station is equipped with an MCA or ATA for data transmission, the
RLC port must be configured on the host PBX with data capability.
4 If you selected Local or Local & Remote, click on the Configure button for
the port you are configuring.
Result: The Local Profile Configuration dialog box displays.
5 Complete the fields as described in “Local Profile Configuration field
descriptions” on page 210.
6 Once you have completed the Local Profile Configuration, click on the OK
button.
Result: The 9150 Device Configuration property sheet re-displays. The
configurations you set are displayed in the port’s Description field.