User manual

Nortel Secure Router 8000 Series
Configuration -WAN Access 13 Medium-MIB configuration
Issue 5.3 (
30 March 2009) Nortel Networks Inc. 13-3
Data preparation
None.
Configuration procedures
No. Procedure
1 Enabling the MIB collecting of the interface
2 Enabling the router to send the trap packet
13.2.2 Enabling the MIB collecting of the interface
Do as follows on the routers:
Step 1 Run:
system-view
The system view appears.
Step 2 Perform the following as required:
z
To enter the E1/CE1/CT1/CPOS interface view, run
controller { e1 | t1 | cpos } controller-number
z
To enter the POS interface view, run:
interface pos interface-number
Step 3 Run:
interface mib-collect enable
The command enables the collection of the statistics information on the interface.
----End
13.2.3 Enabling the router to send the trap packet
Do as follows on the routers:
Step 1 Run:
system-view
The system view appears.
Step 2 Run:
controller { e1 | t1 } controller-number
The E1/CE1/CT1 interface view appears.
Step 3 Run:
interface medium-mib trap enable