User manual

12 PPPoE configuration
Nortel Secure Router 8000 Series
Configuration -WAN Access
12-6 Nortel Networks Inc. Issue 5.3 (
30 March 2009)
No. Data
3 The maximum number of PPPoE sessions that can be set up the on the local
system
Configuration procedures
No. Procedure
1 Configuring to log the state changes of PPPoE users
2 Setting the maximum number of sessions available on a local MAC address
3 Setting the maximum number of sessions available on a peer MAC address
4 Setting the maximum number of sessions available on the local system
5 Checking the configuration
12.3.2 Configuring to log the state changes of PPPoE users
Do as follows on the routers:
Step 1 Run:
system-view
The system view appears.
Step 2 Run:
pppoe up-down-log enable
The command logs the change in the status of PPPoE users.
----End
12.3.3 Setting the maximum number of sessions available on a
local MAC address
Do as follows on the routers:
Step 1 Run:
system-view
The system view appears.
Step 2 Run:
pppoe-server max-sessions local-mac number
The command configures the maximum number of sessions that can be set up on a local MAC
address.