User manual

Nortel Secure Router 8000 Series
Configuration -WAN Access 10 Low-speed ATM configuration
Issue 5.3 (
30 March 2009) Nortel Networks Inc. 10-45
ppp authentication-mode pap
ip address 202.38.160.1 255.255.255.0
remote address pool 1
#
interface Virtual-Template11
ppp authentication-mode pap
ip address 202.38.161.1 255.255.255.0
remote address pool 1
#
interface Atm1/0/0
pvc to_adsl_a 0/60
map ppp Virtual-Template10
pvc to_adsl_b 0/61
map ppp Virtual-Template11
#
aaa
local-user user2 password simple pwd2
local-user user1 password simple pwd1
ip pool 1 202.38.162.1 202.38.162.100
#
return
10.12.4 Example for configuring PPPoEoA
Networking requirements
You dial the hosts in the two Ethernets the ATM network through an ADSL router, and
communicate with the router through DSLAM.
The WAN port of the router and the DSL interface of the ADSL router adopt the PPPoEoA.
Each host within the two Ethernets use a pre-installed PPPoE Client program to complete PAP
authentication with routers, and obtain the IP address from the remote AAA server of the other
side (not included in the following figure).
Figure 10-6 PPPoEoA configuration networking diagram
ATM1/0/0.1
VT10: 202.38.160.1/24
VT11: 202.38.161.1/24
To ADSL Router A: 0/60
To ADSL Router B: 0/61
Router C
ADSL Router A
ADSL Router B
DSLAM
Server
Server
Ethernet
Ethernet
PC
PC