User manual

10 Low-speed ATM configuration
Nortel Secure Router 8000 Series
Configuration -WAN Access
10-22 Nortel Networks Inc. Issue 5.3 (
30 March 2009)
10.6 Configuring the PPPoA application
10.6.1 Establishing the configuration task
Applicable environment
To enable the ATM to carry PPPoA packets, you need to create PVC first.
Configure the PPPoA application mapping on the PVC to enable the AAL5 to carry PPPoA
packets.
Preconfiguration tasks
Before configuring PPPoA applications, complete the following tasks:
z
Configuring physical attributes for the ATM interface
z
Creating a virtual template (VT) and configuring its IP address and mask
Data preparation
To configure PPPoA applications, you need the following data.
No. Data
1 Number of the ATM interface or sub-interface
2 IP address and mask of the ATM interface or sub-interface
3 PVC name, ATM network VPI and VCI
4 AAL5 encapsulation type
5 Number of the VT
Configuration procedures
No. Procedure
1 Configuring PPPoA mapping on a PVC
2 Checking the configuration
10.6.2 Configuring PPPoA mapping on a PVC
Do as follows on the routers:
Step 1 Run:
system-view
The system view appears.