User manual

Nortel Secure Router 8000 Series
Configuration -WAN Access 10 Low-speed ATM configuration
Issue 5.3 (
30 March 2009) Nortel Networks Inc. 10-1
10 Low-speed ATM configuration
About this
T hows the con
chapter
he following table s tents of this chapter.
Section Description
10.1 Introduction This section describes concepts and applications of ATM.
10.2 Configuring ATM This section describes how to configure an ATM
interfaces interface.
10.3 Configuring
ATM-classes
ure ATM-class. This section describes how to config
10.4 Configuring the IPoA
application
IPoA.
See Example for configuring IPoA.
This section describes how to configure
10.5 Configuring the IPoEoA
application
e IPoEoA.
See Example for configuring IPoEoA.
This section describes how to configur
10.6 Configuring the PPPoA
application
PPoA.
See Example for configuring PPPoA.
This section describes how to configure P
10.7 Configuring the
PPPoEoA applica
tion
ow to configure PPPoEoA.
See Example for configuring PPPoEoA.
This section describes h
10.8 Creating a PVC-group
and configuri
ng the PVC
PVC service mapping.
service mapping
This section describes how to configure PVC-group and
10.9 Configuring the serv
type of PVC
ice ervices. This section describes how to configure PVC s
10.10 Configuring ATM OAM This section describes how to configure ATM OAM.
10.11 Maintaining ATM This section describes how to maintain ATM.
10.12 Configuration examples rovides several configuration examples of
ATM.
This section p