User manual

Nortel Secure Router 8000 Series
Configuration -WAN Access 8 Frame relay configuration
Issue 5.3 (
30 March 2009) Nortel Networks Inc. 8-61
interface Serial2/0/0
link-protocol fr
fr interface-type dce
fr dlci 200
#
interface Serial3/0/0
link-protocol fr
fr interface-type dce
fr dlci 300
#
fr switch pvc1 interface serial 1/0/0 dlci 100 interface serial 2/0/0 dlci 200 group
1
fr switch pvc2 interface serial 1/0/0 dlci 100 interface serial 3/0/0 dlci 300 standby
pvc1 group 1
#
return
8.14.6 Example for configuring the backup of frame relay over IP
Networking requirements
As shown in Figure 8-9, configure the tunnel interface by the ethernet interfaces of Router B
and Router C that back up the FR over IP FR link.
Figure 8-9 Networking diagram of the FR standby groups over IP
RouterA RouterB
RouterC RouterD
Serial1/0/0
Serial2/0/0
Ethernet3/0/0
10.1.1.1/24
Serial1/0/0
196.1.1.1/24
Serial2/0/0
Ethernet3/0/0
10.1.1.2/24
Serial1/0/0
Serial1/0/0
196.1.1.2/24
DLCI=100
DLCI=300
DLCI=200
Configuration roadmap
The configuration roadmap is as follows:
1. Configure the link protocol to FR.
2. Configure the working mode of each interface.
3. Configure the FR backup of Router B and Router C.