User manual

Nortel Secure Router 8000 Series
Configuration -WAN Access 8 Frame relay configuration
Issue 5.3 (
30 March 2009) Nortel Networks Inc. 8-55
link-protocol fr
interface-type nni
erface Serial1/0/0 dlci 200
r
tion file of Router D
outerD
te
address 196.1.1.2 255.255.255.0
8.14.4 Exam e for configuring the frame realy switching PVC
You configure the FR switching PVC to complete the FR route function in a network with two
Configuration
The configuration roadmap is as follows:
the link protocol on each interface to FR.
interface.
C globally.
Data preparati
To configure the FR switching PVC, you need the following data:
The VC number of each network segment is shown in Figure 8-7.
Configuration pro
Step 1 Configure Router A.
al 1/0/0.
w
ial 1/0/0
[RouterA-Serial1/0/0] nk-protocol fr
address 196.1.1.1 255.255.255.0
fr
fr dlci-switch 300 int
fr dlci 200
#
eturn
z
Configura
sysname R
#
in rface Serial2/0/0
link-protocol fr
ip
#
return
pl
Networking requirements
or more routers.
As shown in Figure 8-7, Router B and Router C are two routers. Serial 1/0/0 and Serial 2/0/0
are interconnected through the FR switching between Router B and Router C.
roadmap
1. Configure
2. Configure the working mode of each
3. Configure the VC number of each network segment.
4. Enable the FR switching in Router B and Router
5. Configure the FR switching PVC.
on
z
z
The IP address of Router A is 196.1.1.1/24.
z
The IP address of Router D is 196.1.1.2/24.
cedure
# Configure Seri
<RouterA> system-vie
[RouterA] interface ser
li
[RouterA-Serial1/0/0] ip