User manual

8 Frame relay configuration
Nortel Secure Router 8000 Series
Configuration -WAN Access
8-44 Nortel Networks Inc. Issue 5.3 (
30 March 2009)
8.12.4 Checking the configuration
Run the following commands to check the previous configuration.
Action Command
Check the configuration and
status of the MFR interface.
display interface mfr [ interface-number ] [ | { begin |
exclude | include } regular-expression ]
8.13 Maintaining frame relay and MFR
This section covers the following topics:
z
Clearing the statistics of frame relay and dynamic address mapping entries
z
Debugging frame relay and MFR
8.13.1 Clearing the statistics of frame relay and dynamic address
mapping entries
When you use the reset fr inarp command to clear the dynamic address mapping entries, the
network structure changes and the original address mapping becomes invalid.
Run the reset command in the user view to clear the statistics or dynamic address mapping
entries of the FR.
Action Command
Clear statistics about an FR interface. reset counters interface [ interface-type
[ interface-number ] ]
Clear FR dynamic address mappings.
reset fr inarp