User manual

8 Frame relay configuration
Nortel Secure Router 8000 Series
Configuration -WAN Access
8-40 Nortel Networks Inc. Issue 5.3 (
30 March 2009)
Step 2 Run:
interface mfr interface-number
The command creates an MFR interface and the MFR main interface view appears.
Step 3 Run:
mfr bundle-name [ name ]
The command configures the bundle identifier.
By default, the MFR bundle identifier is "mfr + the bundle interface number".
NOTE
You use the mfr bundle-name command in the main interface of MFR but not in the sub-interface.
----End
8.11.3 Configuring MFR bundle link identifier
Do as follows on the routers:
Step 1 Run:
system-view
The system view appears.
Step 2 Run:
interface interface-type interface-number
The MFR main interface view appears.
Step 3 Run:
mfr link-name [ name ]
The command configures the name of bundle link identifier.
By default, the bundle link identifier is the name of current physical interface.
----End
8.11.4 Configuring hello packet parameters of MFR bundle link
Do as follows on the routers:
Step 1 Run:
system-view
The system view appears.
Step 2 Run:
interface interface-type interface-number
The interface view appears.
Step 3 Run: