User manual

8 Frame relay configuration
Nortel Secure Router 8000 Series
Configuration -WAN Access
8-2 Nortel Networks Inc. Issue 5.3 (
30 March 2009)
Section Description
8.7 Configuring PVC standby
groups of frame rela
y
switching
up
ay over
This section describes how to configure the PVC back
and tunnel interface backup of FR.
See:
z
Example for configuring the PVC backup of frame
relay switching.
z
Example for configuring the backup of frame rel
IP
.
8.8 Configuring frame relay
over an IP network
This section describes how to configure FR over IP.
See Example for configuring frame relay over IP.
8.9 Configuring frame relay
FRF.9 compression
es how to configure P2P and P2MP
FR compression.
This section describ
See Example for configuring the frame relay frf9
compression.
8.10 Configuring frame relay
IP header
compression compression.
This section describes how to configure FR IP header
8.11 Configuring MFR bundle
and MFR bundle Link
d
bundle link.
This section describes how to configure MFR binding an
MFR
8.12 Configuring MFR
restriction parameters window.
This section describes how to MFR fragmentation and
sliding
8.13 Maintaining frame relay
and MFR
This section describes how to maintain FR and MFR.
8.14 Configuration examples This section provides several configuration examples of
FR.
8.15 Troubleshooting This section describes how to diagnose and remove FR
faults.