User manual

7 LAPB and X.25 configuration
Nortel Secure Router 8000 Series
Configuration -WAN Access
7-32 Nortel Networks Inc. Issue 5.3 (
30 March 2009)
No. Data
2 To configure X.25 switching route, you need:
z
The forwarding address is a hunt group or an interface
z
The X.121 address, source and destination address of the forwarding
Configuration procedures
No. Procedure
1 Enabling or disabling X.25 switching
2 Configuring X.25 hunt group
3 Configuring X.25 switching route
4 Checking the configuration
7.5.2 Enabling or disabling X.25 switching
Do as follows on the routers:
Step 1 Run:
system-view
The system view appears.
Step 2 Run:
x25 switching
The command enables X.25 switching.
----End
7.5.3 Configuring X.25 hunt group
Do as follows on the routers:
Step 1 Run:
system-view
The system view appears.
Step 2 Run:
x25 hunt-group hunt-group-name { round-robin | vc-number }
The command creates an X.25 hunt group.
Step 3 Run:
channel interface serial interface-number