User manual

Nortel Secure Router 8000 Series
Configuration -WAN Access 7 LAPB and X.25 configuration
Issue 5.3 (
30 March 2009) Nortel Networks Inc. 7-1
7 LAPB and X.25 configuration
About this
T le shows the con
chapter
he following tab tents of this chapter.
Section Description
7.1 Introduction escribes basic knowledge about X.25 and This section d
LAPB.
7.2 LAPB configuration This section describes how to configure LAPB
parameters
.
xample for configuring LAPB.
See E
7.3 Configuring an X.25
interface in .
z
uters by Using
ic
range
mple for configuring X.25 sub-interfaces
This section describes how to configure an X.25
terface
See:
Example for dire
ctly connecting two ro
X.25
z
Example for connecting routers to an X.25 publ
packet network
z
Example for configuring the VC
z
Exa
7.4 Configuring X.25
datagram transmission
ata
tr X.25 switching.
z
onfiguring the TCP/IP header
for transmitting IP datagrams through X.25
This section describes how to configure X.25 d
ansmission and
See:
Example for c
compression
z
Example
PVC