User manual

6 PPP and MP configuration
Nortel Secure Router 8000 Series
Configuration -WAN Access
6-54 Nortel Networks Inc. Issue 5.3 (
30 March 2009)
96 packets input, 1546 bytes
97 packets output, 1568 bytes
----End
Configuration files
z
Configuration file of Router A
#
sysname RouterA
#
interface Pos1/0/0
link-protocol ppp
ppp authentication-mode chap
ppp chap user rta
ip address 10.110.0.1 255.255.255.0
#
aaa
local-user rtb password simple hello
#
return
z
Configuration file of Router B
#
sysname RouterB
#
interface Pos1/0/0
link-protocol ppp
ppp authentication-mode chap
ppp chap user rtb
ip address 10.110.0.2 255.255.255.0
#
aaa
local-user rta password simple hello
#
return
6.12.4 Example for binding MPs into the MP-group
Networking requirements
You connect the two serial interfaces of Router A and Router B respectively with each other,
and bind MP group to configure MP binding.
Figure 6-3 Networking diagram of the MP-group binding
RouterA
Serial1/0/0
Serial2/0/0
Serial1/0/1 Serial2/0/1
Mp-group0/0/1
111.1.1.1/24
RouterB
Mp-group0/0/2
111.1.1.2/24