User manual

Nortel Secure Router 8000 Series
Configuration -WAN Access 6 PPP and MP configuration
Issue 5.3 (
30 March 2009) Nortel Networks Inc. 6-23
Step 1 Run:
system-view
The system view appears.
Step 2 Run:
interface interface-type interface-number
The interface view appears.
Step 3 Run:
timer hold seconds
The command configures the timeout period of polling on the interface.
The interval of the polling time ranges from 0 to 32767 in second. The default value is 10
seconds.
----End
6.5.6 Configuring DNS server address negotiation
Admitting all DNS server address proposed by the peer
Do as follows on the routers:
Step 1 Run:
system-view
The system view appears.
Step 2 Run:
interface interface-type interface-number
The interface view appears.
Step 3 Run:
ppp ipcp dns admit-any
The command admits all the DNS server addresses proposed by the peer.
----End
Configuring the DNS server address of the local negotiation
Do as follows on the routers:
Step 1 Run:
system-view
The system view appears.
Step 2 Run:
interface interface-type interface-number