User manual

Installing the Versalar 15000
308684-B Rev 00
2-5
Supplying Equipment
You might need items that are not included in the Versalar 15000 accessory
package. Before installing the Versalar 15000 hardware, ensure that you have all
the cables, tools, and other equipment that you need.
Management Console
To configure startup options and to monitor the results of startup diagnostics, you
can attach an optional VT-100 console or equivalent, such as a PC terminal
emulator. Or, you can attach an AT-compatible modem to allow dial-in access to
startup configuration and diagnostics.
Cables
Unless you specifically ordered them, the cables required for your network
configuration are not included in the Versalar 15000 accessory package. If you do
not have the proper cables, contact your network administrator.
Table 2-2
lists the network cables that are required:
Figure 2-2
shows both the multimode (order no. 7163) and the single-mode
(order no. 7165) SC duplex cables.
Table 2-2. Network Cables
Order No. Length Physical Cable Description Connection
7163 9 ft (2.7 m) SC duplex to SC duplex
connectors; multimode fiber
cable
Nortel Networks PHY A or
PHY B interface to a type SC
network connection
7165 9 ft (2.7 m) SC duplex to SC duplex
connectors; single-mode fiber
cable
Nortel Networks PHY A or
PHY B interface to a type SC
network connection