User manual

Installing and Maintaining the Versalar Switch Router 15000
1-14
308684-B Rev 00
Table 1-6 describes the IFP card LEDs.
Table 1-6. IFP Card LEDs
LED State Meaning
Pwr Off Power is off.
On (green) Power is on.
Stat Off LED is not functioning.
On (green) IFP card is operating normally.
Flashing
(green)
Power-up diagnostic testing is in progress. Diagnostic testing
occurs when you cold-start the module by cycling power, issuing
the
diags
command from the BCC, or installing the IFP card with
the power on.
On (amber) Diagnostic testing failed. The IFP card is waiting for an automatic
attempt to reinitiate diagnostic testing. If the Stat LED lights
amber again, call the Nortel Networks Technical Solutions Center.
Run Off Processor code is not loaded.
On (green) Boot process is complete.
Flashing
(green)
Booting.
On (amber) Fault is detected.
AP1 Off IFP card is not processing inbound packets for the CAP card
present in processor card slot 1.
On (green) IFP card is processing inbound packets for the CAP card present
in processor card slot 1.
AP2 Off IFP card is not processing inbound packets for the CAP card
present in processor card slot 2.
On (green) IFP card is processing inbound packets for the CAP card present
in processor card slot 2.
AP3 Off IFP card is not processing inbound packets for the CAP card
present in processor card slot 3.
On (green) IFP card is processing inbound packets for the CAP card present
in processor card slot 3.
AP4 Off IFP card is not processing inbound packets for the CAP card
present in processor card slot 4.
On (green) IFP card is processing inbound packets for the CAP card present
in processor card slot 4.
(continued)