User manual

Installing and Maintaining the Versalar Switch Router 15000
1-10
308684-B Rev 00
Table 1-4 describes the DS3 status LEDs for all the AP cards.
Table 1-4. DS3 Status LEDs
LED State Meaning
Ports 1 to 6
Sync
Off Port is not configured or the software is not initialized.
On (green) Port has achieved frame synchronization.
Flashing
(green)
Port has not achieved frame synchronization. A loss of
frame (LOF) or loss of signal (LOS) condition exists.
Ports 1 to 6
Maj
Off No major alarm is detected on this port.
On (amber) A major alarm is detected on this port. A loss of frame
(LOF), loss of signal (LOS), or alarm indication signal
(AIS) condition exists.
Ports 1 to 6
Min
Off No minor alarm is detected on this port.
On (amber) A minor alarm is detected on this port. A remote alarm
indication (R-AIS) condition exists.
Ports 1 to 6
Te s t
Off Port is operating normally.
On (green) Port is operating in a DS3 loopback state.