User manual

Installing and Maintaining the Versalar Switch Router 15000
1-6
308684-B Rev 00
Examples of Card Configuration
The performance configuration is additive from the base configuration. For
example, to set up the performance configuration for four AP cards and two TP
cards, add an IFP card in slot 7 to the base configuration. The resulting
configuration is:
AP1, AP2, AP3, AP4, TP11, TP12, IFP6, IFP7, IFP8, SSP9
The redundant configuration is additive from the performance configuration. For
example, to set up the redundant configuration for four AP cards and two TP
cards, add an AP card in slot 5 and an SSP card in slot 10. The resulting
configuration is:
AP1, AP2, AP3, AP4, AP5, TP11, TP12, IFP6, IFP7, IFP8, SSP9, SSP10
Access Processor Cards
The Versalar 15000 supports four AP cards in chassis slots 1 to 5.
4 2 4 AP cards in slots 1, 2, 3, and 4
2 TP cards in slots 11 and 12
2 IFP cards in slots 6 and 8
1 SSP card in slot 9
1 IFP card in
slot 7
1 AP card in slot 5
1 SSP card in slot 10
5 2 5 AP cards in slots 1, 2, 3, 4, and 5
2 TP cards in slots 11 and 12
3 IFP cards in slots 6, 7, and 8
1 SSP card in slot 9
None N/A
Note:
If you do not use all the slots from 1 to 5, use the lowest-numbered slots
first.
Table 1-1. Installation Possibilities
(continued)
AP Cards TP Cards Base Configuration
Performance
Configuration Redundant Configuration