User manual

Technical Specifications
308684-B Rev 00
A-5
Service Modem Interface
The SSP card has one modem service interface, labeled Modem; its DB-9 plug
connector provides an RS-232-D serial connection. You use this local modem port
to connect the Versalar 15000 to any Hayes-compatible modem for remote dial-in
access.
The Versalar 15000 shipping package includes the console/modem cable for
connecting devices to the modem port. To connect a modem, use the cable and a
standard 15-foot molded AT serial cable with DB-9 receptacle to DB-25 plug
connectors.
Table A-3
identifies the signal and pin assignments for the modem port.
Table A-3. Service Modem Port DB-9 Pin Assignments
Pin Assignment Pin No. Signal Name To Signal
1 DCD (data carrier detect) DCD
2 TXD (transmit data) RXD
3 RXD (receive data) TXD
4 DSR (data set ready) DTR
5GND GND
6 DTR (data terminal ready) DSR
7 CTS (clear to send) RTS
8 RTS (request to send) CTS
9 Not used N/A
Pin 1
Pin 9