User manual

Operating the Versalar 15000
308684-B Rev 00
5-9
Installing Flash or Option Memory Cards in the SSP Card
To install a flash or option memory card in an SSP card:
1.
Remove the memory card access cover by squeezing the sides of the cover
at the top and bottom (Figure 5-4
on page 5-7).
2.
Position the card with the label facing to the left and the insert arrow
pointing toward the card receptacle (Figure 5-6)
.
3.
Insert the card into the card receptacle.
Figure 5-6. Inserting a Flash or Option Memory Card
4.
Gently push the card in until it fits snugly in place.
If the memory card is new and you did not obtain it from Nortel Networks,
you must format the card before attempting to write to it. See Managing and
Troubleshooting Carrier Networking Services for instructions.
5.
Install the memory card access cover.
BAC0030A