User manual

Installing and Maintaining the Versalar Switch Router 15000
4-26
308684-B Rev 00
When you have the correct equipment, complete the following steps:
1.
Turn on and configure a comm port on the PC, using the parameters in
Tab le 4-1
.
Refer to the PC user manual for instructions.
2.
Insert the 9-pin receptacle end of the console cable into the console
connector on the SSP interface console card (Figure 4-17)
.
Table 4-1. PC Parameters
Parameter Value
Baud rate 9600
Data bits 8
Stop bits 1
Parity None