User manual

Installing Processor and Interface Cards and Connecting Equipment
308684-B Rev 00
4-23
To lock a coaxial cable to the T3 connector:
1.
Gently push the coaxial cable onto the T3 connector (Figure 4-15).
2.
Turn the coaxial cable to the left until the key on the T3 connector clicks
into the notch on the coaxial cable.
3.
Bundle the cables for each slot to facilitate card installation and removal.
Refer to your cable management policy for bundling information.
Figure 4-15. Connecting a Coaxial Cable to the T3 Interface Card
BAC0060A
1
2
3