User manual

Installing and Maintaining the Versalar Switch Router 15000
4-16
308684-B Rev 00
4.
Holding the interface card by its top and bottom edges, orient the card so
that the EMI card shield is on the right (Figure 4-10)
.
Figure 4-10. Positioning an Interface Card
5.
Align the interface card with the chassis slot arrows above and below the
card slot.
6.
Holding the card handles open, slide the interface card into the slot using
the card guides (Figure 4-11)
.
7.
Insert the card until its connector panel touches the Versalar 15000 back
panel.
VRS0062A
EMI
card
shield