User manual

Installing and Maintaining the Versalar Switch Router 15000
4-8
308684-B Rev 00
Installing a Processor Card
You can install a processor card with the power on or off.
To install a processor card:
1.
Attach the antistatic wrist strap.
For instructions, see “Attaching the Antistatic Wrist Strap
” on page 4-3.
2.
Locate the slot where you want to install the processor card (Figure 4-5).
3.
Remove the air flow module.
Caution:
Electrostatic discharge can damage hardware. Attach the antistatic
wrist strap before handling any Versalar 15000 components.