Manualshelf

User's Manual

ManualsBrandsNortel Networks ManualsNetwork HardwareNortel Networks Network Hardware 400 4.0
919293949596979899100
98 Chapter 6 Installing the BCM main unit
N0060612N0060612
Figure 57 Attach the wall-mount brackets to the BCM200 main unit
Figure 58 Attach the wall-mount brackets to the BCM400 main unit
8 Hang the BCM main unit on the backboard screws. Make sure the main unit is level. Ensure
the wood screw heads seat fully into the wall-mount bracket slots.
9 Tighten the wood screws against the wall-mount bracket.
Installing the main unit on a flat surface
Use this procedure to install the BCM main unit on any flat surface that can safely support the
weight of the unit.
Caution: Refer to “Environmental requirements” on page 87 for acceptable
environmental conditions before selecting a location for the BCM main unit.
Install wall-mount
bracket screws
Install wall-mount
bracket screws