Manualshelf

User's Manual

ManualsBrandsNortel Networks ManualsNetwork HardwareNortel Networks Network Hardware 400 4.0
191192193194195196197198199200
Chapter 16 Using Element Manager to set the basic parameters 193
BCM200/400 4.0 Installation and Maintenance Guide
Chapter 16
Using Element Manager to set the basic parameters
The Element Manager application provides a computer-based client interface that can connect to
devices over an IP network and display the programming interface for that device.
Through Element Manager, you can configure all of the basic parameters, which include:
• “Configuring the initial parameters” on page 195
• “Configuring the startup parameters” on page 198
Refer to the BCM 4.0 Administration Guide for more information on how to use Element Manager.
Figure 95 shows an overview of using Element Manager to set the basic parameters.
Figure 95 Overview of using Element Manager