User's Manual

Chapter 14 Configuring the BCM system 185
BCM200/400 4.0 Installation and Maintenance Guide
Startup parameters overview
The startup parameters are the remaining required parameters that cannot be configured using
Telset Administration. These parameters must be configured using Element Manager or the
Startup Profile. See Table 65 for a list of the startup parameters.
Table 65 Startup parameters (Sheet 1 of 2)
Parameters Telset Administration Element Manager Startup Profile
System:
• System name
N/A Configuration > System >
Identification
(ID set automatically)
System
System:
• System ID
N/A Configuration > System >
Keycodes
(View ID - it is set
automatically and cannot
be changed)
System
Time:
• Date and Time source
• NTP server address
• Date and time
• Time zone
N/A Configuration > System >
Date and Time
Time
DHCP server:
• Enable/disable server
• IP domain name
• Primary DNS
• Secondary DNS
• Default gateway
N/A Configuration > Data
Services > DHCP Server >
Subnets tab
DHCP Server
IP Phones:
• Enable registration
• Enable global pwd
• Global pwd
• Auto-assign DNs
• Advertisement logo
N/A Configuration > Resources
> Telephony Resources
IP Telephones
SNMP Agent:
• Enable/disable SNMP
agent
• Minimum security
• SNMP version support
N/A Configuration >
Administrator Access >
SNMP > General tab
SNMP Agent
SNMP community:
• Community string
• Type of access
N/A Configuration >
Administrator Access >
SNMP > Community
strings tab
SNMP Community