User's Manual

Chapter 9 Connecting the cables 153
BCM200/400 4.0 Installation and Maintenance Guide
Table 54 demonstrates either a double-density system.
DECT combinations
This section describes a system containing a DECT MBM, three BRIM MBMs, and two DSM 32s.
This configuration uses all the DS30 channels, with the exception of one offset.
Table 55 demonstrates this combination, including the switch settings for each MBM.
Table 54 All station MBMs set for double density
DS30
channel
#
Each heavily-outlined and shaded square represents one
module Switch setting
1
DSM32+
offset 0
1
DSM16+
offset 0
2
ASM8s/
GASM8
offset 0 and 1
2
DTMs
offset 0 1 2 3 4 5 6
2
0 DSM 32+ settings: offononononon
3
0 DSM 32+ settings: offononononoff
4
0 DSM 16+ settings: off on on on off on
0 DSM 16+ settings: off on off on off on
5
0 ASM 8 settings: on on on on off on
1 ASM 8 settings: on on off on off on
0 ASM 8 settings: on off on on off on
1 ASM 8 settings: on off off on off on
6 0 onononoff on on
7
0 onononoff on off