User's Manual

136 Chapter 8 Installing a media bay module (MBM)
N0060612N0060612
To install an MBM in the BCM main unit or expansion unit
1 Ensure that the switches on the MBM are set correctly. For information about how to set the
switches, refer to “Determining MBM DIP switch settings” on page 116. In the case of FEM
modules, the switches activate the front ports. Ensure that the switches accurately reflect the
ports you require. Refer to “FEM switch settings” on page 133.
2 Select an open media bay.
3 With the face of the MBM facing toward you, insert the MBM into the open bay.
4 Push the MBM completely into the unit. You will hear a click when the MBM is firmly seated
in the media bay.
5 Repeat steps 2 to 4 for each MBM you want to install.