User's Manual

Chapter 8 Installing a media bay module (MBM) 131
BCM200/400 4.0 Installation and Maintenance Guide
DSM16+ and DSM 32+ double density switch settings (upgraded system)
The following table shows the switch settings for DSM-plus modules deployed as double density
on a system that has been upgraded from BCM 2.5 to BCM 3.0 or later software.
Table 42 DSM16/DSM16+ and DSM32/DSM32+ single-density switch settings (upgraded system)
Select
DS30
bus
Enter these switch
settings
**To assign these
DNs to
DSM16 or
DSM 16+
To assign these DNs to
DSM 32 or DSM 32+
123456
2
on on on on on on
221-236 221-252 (DS30 2 and 3)
3
on on on on on off
237-252 237-268 (DS30 3 and 4)
4
on on on on off on
253-268 253-284) (DS30 4 and 5)
5
on on on on off off
269-284 269-300 (DS30 5 and 6)
6
on on on off on on
285-300 285-316 (DS30 6 and 7)
***7
on on on off on off
301-316 N/A
**The extensions listed are based on a three-digit DN with a Start DN of 221. If your system has longer DNs or a
different Start DN, enter the range in the blank column.
***If your system is configured with a 3/5 DS30 split, you cannot use DS30 7 for the DSM 16 module. You cannot
configure the DSM 32 module for DS30 6 because the second set of DNs cannot be accessed.
Note: DSM modules deployed with BCM 2.5 systems are all single density and cannot be
set to double density. The DSM 16+ and DSM32+ modules can be set to either density.
Table 43 DSM 16+ and DSM32+ double density switch settings (upgraded system)
Select
DS30
bus
Enter these switch settings
*To assign these DNs
to
DSM 16+:
(A= DSM1, B=DSM2)
To assign these DNs to
DSM 32+
(connectors: A=top,
B = bottom)
12 3456
2
off on on onononA
221-236 A 377-392
off on off onononB
377-392 B 221-236
3
off on on on on off A
237-252 A 393-408
off on off on on off B
393-408 B 237-252
4
off on on on off on A
253-268 A 409-424
off on off on off on B
409-424 B 253-268
5
off on on on off off A
269-284 A 425-440
off on off on off off B
425-440 B 269-284
6
off on on off on on A
285-300 A 441-456
off on off off on on B
441-456 B 285-300
**7
off on on off on off A
301-316 A 457-472
off on off off on off B
457-472 B 301-316
* The extensions listed are based on a three-digit DN with a Start DN of 221. If your system has longer DNs or a
different Start DN, enter the range in the blank column.
** If your system is configured with a 3/5 split, you cannot use DS30 7 for the DSM 16 module.