User's Manual

Chapter 8 Installing a media bay module (MBM) 129
BCM200/400 4.0 Installation and Maintenance Guide
The mode used defines which features are available, as shown in Table 40.
The GASM8 has the following switches:
• Switch 1: firmware download capability
— off = Standard mode
— on = Enhanced mode
• Switch 2: when to download firmware (for the enhanced mode only)
— off = automatic firmware download from BCM (default)
— on = forced firmware download from BCM system cold start
• Switch 3: echo cancellation
— off = Enabled (default)
— on = Disabled
• Switches 4-8: settings choices are based on a country profile. Refer to the tables below for the
correct settings to ensure proper functionality.
Table 40 GASM8 modes and features
GASM8 modes
Mode featuresStandard Enhanced
••
Basic call features for analog devices
••
Message Waiting Indication (MWI)
•
Firmware download capability
•
Disconnect Supervision
•
Calling Line Identification (CLID)
Standard mode
Mode select
DIP switch
settings
Country select
DIP switch settings
Country profile
1 2 3 4 5 6 7 8
off off off off off off off off North America
off off off off off off off
on
United Kingdom
off off off off off off
on
off Australia
off off off off off off
on on
Poland
Note: Switch settings not shown in this table will default to the North American
profile.
Enhanced mode
on
off off off off off off off North America
on
off off off off off off
on
United Kingdom
on
off off off off off
on
off Australia
on
off off off off off
on on
Poland