User's Manual
Table Of Contents
- Getting Started with the Business Policy Switch 2000 Management Software
- Contents
- Figures
- Tables
- Preface
- Chapter 1: Management basics
- Chapter 2: Installing Device Manager software
- Chapter 3: Device Manager basics
- Chapter 4: Web management interface basics
- Index

Chapter 3 Device Manager basics 31
Getting Started with the Business Policy Switch 2000 Management Software
Figure 4 Properties dialog box
2 Type information and select check boxes.
3 Click OK.
Table 1 describes items in the Properties dialog box.
Table 1 Properties dialog box items
Area Item Description
Polling Status Interval Interval at which statistics and status information are gathered (default is
300 seconds).
(Iftraps,Status
Interval)
Interval at which statistics and status information are gathered when traps
are enabled (default is 300 seconds).
Hotswap Detect
every
The interval at which Device Manager polls for module information
(default is 600 seconds).
Enable Enables (checked) or disables (not checked) periodic polling of the device
for updated status. If polling is disabled, the switch or stack status is
updated only when you click Refresh in the chassis window.