User's Manual
Table Of Contents
- Getting Started with the Business Policy Switch 2000 Management Software
- Contents
- Figures
- Tables
- Preface
- Chapter 1: Management basics
- Chapter 2: Installing Device Manager software
- Chapter 3: Device Manager basics
- Chapter 4: Web management interface basics
- Index

Chapter 1 Management basics 19
Getting Started with the Business Policy Switch 2000 Management Software
Figure 1 Main menu
5 Select IP Configuration/Setup (or press i) to display the IP
Configuration/Setup menu (Figure 2).
Figure 2 IP Configuration/Setup menu
Note: The default management VLAN in the Business Policy Switch is
VLAN 1. To manage the switch, make sure the network management
station is on the management VLAN or is connected to the management
VLAN through routers.
Business Policy Switch Main Menu
I
P Configuration/Setup...
SNM
P Configuration...
S
ystem Characteristics...
Sw
itch Configuration...
Co
nsole/Comm Port Configuration...
Identify U
nit Numbers...
Ren
umber Stack Units...
Display H
ardware Units...
Sp
anning Tree Configuration...
T
ELNET Configuration...
Sof
tware Download...
Config
uration File...
Display E
vent Log
R
eset
Reset to D
efault Settings
L
ogout
Use arrow keys to highlight option, press <Return> or <Enter> to
select option. Press Ctrl-R to return to previous menu. Press Ctrl-C
to return to Main Menu.
IP Configuration/Setup
BootP Request Mode: [ BootP Disabled ]
Configurable In Use Last Boot
------------------ ----------------- -------------
In-Band Stack IP Address: [xx.xx.xx.xxx] xx.xx.xx.xxx 0.0.0.0
In-Band Switch IP Address: [xx.xx.xx.xxx] 0.0.0.0
In-Band Subnet Mask: [255.255.255.0] 255.255.255.0 0.0.0.0
Default Gateway: 0.0.0.0 0.0.0.0 0.0.0.0
Use space bar to display choices, press <Return> or <Enter> to select
choice. Press Ctrl-R to return to previous menu. Press Ctrl-C to
return to Main Menu.