User manual

30 Chapter 2 Installation Process
320846-A
Establishing a console connection
Establish a console connection by cabling the unit to a terminal or a computer
running a terminal emulator session.
To establish a console connection, follow these steps:
1 Using the supplied console cable, connect the terminal to the console port.
2 Power on the terminal and the Nortel Secure Network Access Switch 4050.
3 To initiate the system connection process, press ENTER on the terminal.
4 At the login prompt, log in as user: admin.
5 At the password prompt, enter the administrator password. The default
administrator password is admin.
Note: To ensure continuing system security, change the default password to the password of your
choice after you successfully configure the switch.
After password verification, the system displays the Setup menu with the
information shown in Figure 6.
Figure 6 Setup menu
Continue the set-up process using instructions for initial setup in the Nortel Secure
Network Access Switch 4050 User Guide (320818-A).
Alteon iSD NSNAS
Hardware platform: 4050
Software version: x.x
-------------------------------------------------------
[Setup Menu]
join - Join an existing cluster
new - Initialize host as a new installation
boot - Boot menu
info - Information menu
exit - Exit [global command, always available]
>> Setup#