User manual

Chapter 1 Overview 19
Nortel Secure Network Access Switch 4050 Installation Guide
Removing the front panel bezel
Remove the bezel for CD drive access. Replace the bezel when you are done.
To remove the bezel, follow these steps:
1 On the left front of the unit, locate and open the bezel release flap (Figure 2).
2 Grasp the bezel and slide the bezel to the right until disengaged.
3 Remove the bezel from the faceplate.
Figure 2 Bezel removal
Figure 3 shows the front panel without the bezel.
Figure 3 Front panel view without bezel
CD Drive Face plate LEDs and buttons USB Connectors