Telephone User Manual

Using System features 99
P0908510 Issue 02 Enterprise Edge Feature Programming Telephone Guide
You cannot forward calls to a direct-dial telephone that is outside your Enterprise
Edge system.
Changing the direct-dial telephone assignments
Your installer sets up the direct-dial telephone.
You can change which direct-dial telephone a telephone is assigned to, or assign it
no direct-dial telephone. You need to start a Unified Manager session to program
this feature. For more information about programming using the Unified Manager,
see the
Enterprise Edge Programming Operations Guide
.
Any number of telephones can be assigned to call the direct-dial telephone.
Hotline
A hotline telephone calls a preset internal or external telephone number when you
pick up the receiver (or press
©
).
Bypassing a Hotline
Press a line button, or use the Pre-Dial or Automatic Dial feature before you pick
up the receiver or press
©
on a hotline telephone. See the
Telephone
Feature Card
or see Changing how you dial your calls
on page 34.
Making a telephone a hotline telephone
You can set up a telephone as a hotline.
Tip
The digit you dial in order to get the direct-dial telephone to ring can be
programmed by your installer.
The Enterprise Edge system cannot verify that the number you assign as an
external direct-dial telephone is valid. Check the number before assigning it
as a direct-dial telephone, and call the direct-dial telephone after you’ve
assigned it in order to test it.
Tip
Label the telephone to inform anyone using it that Hotline is active.
Tip
A Hunt Group set DN can be specified as a Hotline telephone. For more
information on Hunt Groups see Hunt Groups
on page 83.