User manual

Advanced functions
92 NN42030-107 MC 3100 3.1 Standard 03.03 November 2009
1. Expand the Instant Conference pane.
2. Select the entry for the Instant Conference that you want to join.
3. Select Menu, Join Now.
4. Press # when prompted.
If the Instant Conference is still in progress, you join it. If the Instant
Conference has ended, you receive an error message.
Responding to an Instant Conference reminder
If you select Join Later when the Instant Conference starts, you receive
periodic reminders to participate in the call. Select Yes to join the Instant
Conference or No to be reminded again at a later time. To configure the
reminder notification interval, see “Call settings” on page 39.
Managing an Instant Conference with the dialpad
The Instant Conference initiator can execute a variety of functions using
the telephone dialpad. A limited set of these functions is also available to
the Instant Conference participants.
Note: Mid-call features, such as Call Hold, Call Transfer, and Call
Swap, are not available during Instant Conferences. The call handoff
feature is available during Instant Conferences, but only to the
conference participants, not the conference originator.
Table 18 "Instant conference dialpad controls" on page 92 contains
the list of Instant Conference dialpad controls.
Table 18: Instant conference dialpad controls
Dialpad
control
Function Comments
** Starts the help
system.
The help system plays a recorded list
of command descriptions. For
example, “Press 6 to mute or unmute
yourself.” The functions you can
perform depend on your status as
either an Instant Conference initiator
or participant
.