User manual

Bluetooth headset feature activation 103

The Bluetooth Setup dialog box appears.

2 Uncheck the Use Bluetooth headset check box and press the

Exit key or, alternatively, uncheck the Enable Bluetooth check

box.

If you uncheck the first option and press the Exit key the wired

headset/handset will work after several seconds. If you uncheck

the second option you can immediately switch to the wired

headset/handset.

A check mark indicates that the wireless headset is active. Clear

the check mark to use a wired headset/handset. This option is

on (o) by default.

3 Press the Exit key to toggle this option on or off.

--End--

Bluetooth headset feature activation

Feature activation using a Bluetooth wireless technology headset paired

with an IP Phone may be different from the headset manufacturers

instructions. When paired with an IP Phone the following limitations apply:

• Feature activation on an IP Phone paired with a BT headset depends

on server implementation.

•

Call Transfer from headset to handset does not work in a handsfree

profile.

• The administrator must provision Auto Answer on Ring against the user

to use the Call answer functionality.

Call answer

Follow this procedure to answer an incoming call using a headset.

Step Action

1 When there is an incoming call, press the In Calls key.

The incoming call is connected to the headset.

2 Press the Goodbye key to terminate the call.

--End--

Carrier VoIP

Nortel IP Phone 1150E User Guide (CICM)

NN10300-025 01.04 Standard

7 March 2008