Internet Unit Installation Guide

44 Chapter 4 DIP switch settings
300867-G
Switch settings for special configurations
During the power-up sequence, your Instant Internet 400 unit checks the settings
of the switches. You can use the switches on your unit to:
• Reset the password (Table 11), which is useful if you forget the password.
• Reset the password and other user-defined system configuration (Table 12).
• Disable the switch settings for resetting the password and user-defined
configurations (Table 13).
• Restore the original default factory settings (Table 14).
Table 11 shows the switch settings for resetting your unit’s password.
Table 12 shows the switch settings for resetting your unit’s password as well as
some user-defined configurations.
Table 11 Switch settings for resetting the password
12345678
ON
•••••
OFF
•••
Table 12 Switch settings for resetting the password and user-defined
configurations
12345678
ON
••• ••
OFF
•••
Caution: If you use these switch settings to restore your unit, the
following user-defined settings are removed or reset: password, hosts,
port mappings, and unit configuration.