Internet Unit Installation Guide

Chapter 3 Instant Internet 400 hardware installation 33
Setting Up the BayStack Instant Internet 400 Unit
Table 2 shows the LAN interfaces available for your Instant Internet 400 unit.
Table 2 LAN interfaces
Interface name Interface card Type
Eth1 Ethernet connection on the
back of the unit.
Eth2
Eth3
Ethernet interface card with a
BNC connector and an RJ-45
connector. Note: On some
Ethernet interface cards the
BNC connector can be absent.
Note: If you have a triple
Ethernet unit, the Ethernet card
in slot D is Eth2 and the
Ethernet card in slot C is Eth3.
To k 1
To k 2
Token ring interface card with a
9-pin connector and an RJ-45
connector. Note: If you have a
dual token ring unit, the token
ring card in slot D is Tok1 and
the token ring card in slot C is
To k 2 .
9284EB
Ethernet
10/100
Link
AUI
Act
9285EB
LEDs
RJ-45
Ethernet
BNC
Ethernet
9286EB
9-pin
token ring
RJ-45
token ring
4Mb/s
16Mb/s