DECT Industrial Handset User Guide Issue 02 DECT Industrial Handset User Guide Galway M1 Design Support 1
DECT Industrial Handset User Guide Issue 02 Table of Contents TABLE OF CONTENTS ........................................................................................ 2 1 HANDSET INFORMATION .......................................................................... 4 2 GENERAL ....................................................................................................... 5 2.1 2.2 3 HANDSET ....................................................................................................
DECT Industrial Handset User Guide Issue 02 6.4 PERSONAL PHONE BOOK ........................................................................... 20 6.4.1 Add Personal Phone Book Entry....................................................... 20 6.4.2 Edit a Number in the Personal Phone Book ...................................... 21 6.4.3 Edit a Name in the Personal Phone Book ......................................... 22 6.4.4 Delete Personal Phone Book Entry...................................................
DECT Industrial Handset User Guide 1 Issue 02 HANDSET INFORMATION This product is classified with IP52 classification as defined in EN60529. Ensure the adapter voltage is the same as the electrical outlet voltage. The DECT Industrial Handset uses radio signals and does not guarantee a connection in all circumstances. Do not rely on a cordless telephone to make emergency calls.
DECT Industrial Handset User Guide 2 Issue 02 GENERAL 2.1 Handset The handset has 22 keys which are described as follows: Voice (short press) & E2 (long press) Message function. In Menu - Cursor left After a digit - delete last digit. Long press - delete all. In on hook - Redial menu. In Menu - Cursor right. Confirmation or jump to next level in the menu. In off hook - Mute. Long key press turns the handset OFF. In off hook - Recall. In on hook - Enter or exit the menu structure.
DECT Industrial Handset User Guide 2.2 Issue 02 Display Three lines, of 12 alphanumeric characters in length, can show text or caller information.
DECT Industrial Handset User Guide 3 Issue 02 INSTALLATION 3.1 Installing the Charger Connect the power line cable to the back of the charger and then plug the AC adapter into the mains socket outlet. 3.2 Wall Mounting the Charger • Drill two holes in the wall, with a horizontal spacing of 45 mm and insert the screws. • Use a screwdriver to remove the two screws in the top plate of the charger. • Turn the top insert plate 90 degrees in the charger and put the screws back in.
DECT Industrial Handset User Guide Issue 02 Installation of the Chargers on the Charging Rack The chargers can be placed in two different positions, depending on the usage of the chargers. If the chargers are placed on the desktop the chargers should be connected with 2 screws. When the charging racks are wall-mounted the chargers should be connected as follows: 3.5. Battery Management 3.5.1. Battery Installation / Removal The handsets are equipped with a rechargeable NiMh battery pack.
DECT Industrial Handset User Guide 3.7. Issue 02 Operating Times Standby time - up to 90 hours. Talk time – up to 10 hours. 3.8. Battery Charging Information The battery capacity can be checked using the menu option. As follows: 1. Press the key to enter the menu display and use the Menu battery. or keys to select 2. Press the status. key to enter the battery display. The display will show the battery 3. Press the key to go one step back. 4. Press the 3.9 key to go back to normal mode.
DECT Industrial Handset User Guide Issue 02 Note: When the handset is placed in the charger, the vibrator and B-answer (auto answer functions are disabled. 3.10 Low Battery Warning If the battery capacity reaches a certain minimum value: On-Hook • The display flashes battery low. Off-Hook • The display flashes battery low • The handset gives 4 short bleeps every 5 seconds.
DECT Industrial Handset User Guide 4 4.1 Issue 02 INITIAL SETUP Initial Setup and Operation The handset can be operated on a maximum of 10 DECT systems. Before you can make a call via a DECT system, the handset has to be subscribed to the Meridian 1. A pin code is necessary for the subscription process. A complete menu tree is located at the end of this document for reference. 4.2 Create Subscription To subscribe a handset to a system: 1. Press the menu select menu login.
DECT Industrial Handset User Guide Issue 02 The default handset name ‘PHILIPS’ is displayed on handsets that are not subscribed. When the handset cannot be subscribed to the system, the display will show ‘subscription failed’. Press the return to the stand-by display. 4.3 key to leave the subscription failed display and to Remove Subscription To remove a subscription from the handset: 1. Press the menu login. key to enter the menu display and use the 2.
DECT Industrial Handset User Guide Issue 02 4.4 Selecting a DECT System (Roaming) Roaming between Meridian 1 systems is only possible when the handset is subscribed to each system. Manual To switch between DECT systems manually: 1. Press the menu login. key to enter the menu display and use the 2. Press the key to enter the system display and use the select menu select login. or key to select or key to 3. Press the key to enter the login display.
DECT Industrial Handset User Guide 5 Issue 02 USING THE HANDSET A complete menu tree is located at the end of this document for reference. 5.1 Operating in Standby Mode The menu feature operates as follows: 1. Press the key to enter the menu display. 2. Use the or 3. Press the 4. Press the 5.2 key to select the next or previous option. key to go to the selected option, e.g. MENU LOGIN. key to return to the stand-by display.
DECT Industrial Handset User Guide Issue 02 The keypad lock can be activated by pressing the key immediately followed by the * key. The same operation is required to deactivate the keypad lock. ‘KEY LOCKED’ is displayed when the keypad lock is activated. 5.4 Volume Control The volume switch for the earpiece is located at the right hand side of the handset. When the volume switch is pressed, the display shows the current volume setting.
DECT Industrial Handset User Guide Note: When deleting a digit, use the Issue 02 or digit to the right of the digit to be removed. Press the to remove the digit. 2. Press the key to dial the number. 3. Press the key to end the call. keys to place the cursor on the key for extended duration If a space is needed in a number, e.g. to access an external phone line, press the key for 2 seconds. The display will show a '-'. 5.5.2 Off-Hook Dialing To dial a number off-hook: 1.
DECT Industrial Handset User Guide Issue 02 To dial a number from the personal phone book: 1. Press the key to enter the Phone Book. The first entry appears in the display. If the phone book is empty, the key will not function. 2. From this display, there are 2 methods to find a name: - Use the or key to move through the personal phone book entries. - Pressing an alphanumeric key will result in a quick search.. 3. Press the 5.5.4 key to dial the person visible in the display, e.g. Mattie.
DECT Industrial Handset User Guide 5.5.5 Issue 02 Caller List (CLIP) When the handset rings and the call is not answered, it will be stored in the Caller list (CLIP). The Caller list contains a maximum of 10 entries. The entries in the Caller list and the Redial list can be accessed the same way. An item in the Caller list can be distinguished from an item in the Redial list as follows: an item in the Caller list will also turn the red LED on at the top of the handset..
DECT Industrial Handset User Guide Issue 02 If automatic call answering is used, the phone call will be accepted automatically. It is not necessary to press the 5.7 key. Silent Mode In Silent mode the handset will use the vibrator instead of ringer and bleep sounds. To switch the Silent mode ON/OFF: Press the key immediately followed by the # key to switch the Silent mode ON or OFF. SILENT is displayed when this option is switched on. 5.8 SOS Button Press the key to enter Profile Set Up.
DECT Industrial Handset User Guide 6.3 Issue 02 Microphone Mute The microphone mute can be activated or deactivated during conversation by pressing key. When the microphone mute is active the display shows MIC. MUTED. the 6.4 Personal Phone Book Press the key to enter the Phone Book. Note: If there is no entry in the phone book, then the key will not function. The personal phone book is a list of names and numbers, which can be filled out by the user.
DECT Industrial Handset User Guide Issue 02 3. Press the key to enter the number. The display will show NAME:, type in a name using the alphanumeric keys. 4. Press the mode again. 5. Pressing the key to enter the name in the phone book and return to the stand-by key at any time cancels and returns to stand-by mode. Numbers from the Caller list or Redial List can be stored in the personal phone book. 6.4.2 Edit a Number in the Personal Phone Book To edit a personal phone book entry: 1.
DECT Industrial Handset User Guide Note: When deleting a digit, use the Issue 02 or keys to place the cursor on the key for extended duration to digit to the right of the digit to be deleted. Press the remove the digit. 6.4.3 Edit a Name in the Personal Phone Book To edit a personal phone book entry: 1. Press the key to enter the phone book and use the select the required number or key to 2. Press the key when the required number is found. Use the select the edit menu.
DECT Industrial Handset User Guide Issue 02 To delete a personal phone book entry: 1. Press the 2. Press the 'DELETE?' 3. Press the 6.5 key to enter the phone book and select the entry to be deleted. key to select this entry for deletion. The display will show key to confirm deletion and return to the standby mode. Language Selection The handset is designed to contain all the menus in 6 different languages stored in memory. The actual language to be used can be selected via the menus.
DECT Industrial Handset User Guide Issue 02 4. The DN and password can also be entered to access voice mail directly. Note 1: It is possible for another party to determine the password of your voice mail if it is programmed. Note 2: Long press the * for a pause. 5. Short press the 6.7 key to enter voice mail. User Setup (Profiles) There are two user defined profiles. The profiles can be used to select different handset settings.
DECT Industrial Handset User Guide 4. Press the 6.8 Issue 02 key to return to stand-by mode. Settings Within a profile the user can define several settings. These are described in the following sections. Each setting will have a default as shown in the table below. 6.9 Ringer Tone There are 9 different ringer tones. To set a ringer tone: 1. Enter the Set Profile display and use the or key to select ringer tone. key to enter the ringer display. Use the or keys to switch 2.
DECT Industrial Handset User Guide Issue 02 6.10 Ringer Volume The 5-step ringer volume option enables users to set the loudness of the bleep and ringing tones. To set the ringer volume: 1. Enter the Set Profile display and use the or key to select ringer vol.. key to enter the ringer volume display. Use the or keys to 2. Press the increase or decrease the volume. The handset will produce the ringer sound in the increased or decreased loudness setting.
DECT Industrial Handset User Guide Issue 02 6.12 Vibrator The vibrator functions when the handset is ringing or bleeping, it vibrates in the same pattern as the ringer or bleep sound. To switch the vibrator ON/OFF: 1. Enter the Set profile display use the or key to select vibrator. 2. Press the key to enter the vibrator display and use the select ON or OFF. The current setting is shown in capitals. or key to 3. To activate or deactivate the vibrator, press the key.
DECT Industrial Handset User Guide Issue 02 6.14 Start Volume The 5-step start volume option enables users to set the loudness of the earpiece to a certain value to start from. Adjustment during conversation can be made with the – and the + keys at the side of the handset. After conversation the volume is set to the start volume setting. To set the start volume: 1. Enter the Set Profile display and use the or key to select start volume. key to enter the ringer volume display. Use the or keys to 2.
DECT Industrial Handset User Guide Issue 02 show backlight on or backlight off before switching to the Set Profile display. 7 OUT OF RANGE Each handset is equipped with an out of range detection option. There are three detection mechanism for out of range. They are: 1. Display OUT OF RANGE and the disappearance of the 2. A handset will give 3 short bleeps. 3. The LED on top of the handset will flash for 4 seconds. icon.
DECT Industrial Handset User Guide 9 Issue 02 SHORTCUT LIST The following features can be accessed easily via the shortcuts mentioned in the table below.
DECT Industrial Handset User Guide Issue 02 10 MENU TREE KIRK MEN MENU LOGIN PROFILE SET UP MENU BATTERY MENU PHONE BOOK MENU REDIAL MENU LANGUAGE BATTERY CAPACITY ■■■■ A SET PROFILE INDOORS (1) SET PROFILE OUTDOORS (2) SET PROFILE1 BACKLIGHT SET PROFILE1 RINGERTONE SET PROFILE1 RINGER VOL. SET PROFILE1 KEY CLICK SET PROFILE1 VIBRATOR SET PROFILE1 B-ANSWER SET PROFILE1 START VOLUME BACKLIGHT ON/OFF RINGERTONE 1,2......
